| Model |
EIP-7811 |
| Device |
| Device Type |
Fixed Dome Camera |
| Image Sensor |
Sony EXview HAD Progressive Scan CCD |
| CCD Sensor Size |
1/3" (4.8 x 3.6 mm) |
| Day/Night |
Yes |
| Minimum Illumination |
Color: 0.15 lux at F1.2 (30 IRE, Max. AGC); B/W: 0 lux (IR LED on) |
| Color to B/W switch |
CDS sensor based switch, configurable |
| Mechanical IR Cut Filter |
Yes |
IR Sensitivity Range
|
700 - 1100 nm |
IR LED
|
IR LED x 31 (850 nm) |
IR Working Distance
|
40 m (0 lux, 30 IRE, Max Exposure Gain) |
| Electronic Shutter |
1/60 - 1/10,000 sec (60Hz); 1/50 - 1/10,000 sec (50Hz) (manual mode)
2 - 1/100,000 sec (auto mode) |
| Lens |
| Focal Length |
Vari-focal, f3.3 - 12 mm / F1.6 |
Iris
|
DC iris |
Focus
|
Manual focus |
Horizontal Viewing Angle
|
85.8 - 30.3° |
Viewing Angle Adjustment
|
Pan: 0 - 360°; Tilt: 10 - 90°; Rotate: 0 - 360° |
| Video |
Compression
|
H.264, MPEG-4 SP, MJPEG |
Maximum Frame Rate vs. Resolution
|
15 fps at 1280 x 960; 30 fps at 1280 x 720 (HD 720p); 30 fps at 640 x 480 (VGA); 30 fps at 320 x 240 (QVGA); 30 fps at 160 x 112 (QQVGA) |
Streaming
|
Simultaneous dual streams based on two configurations |
| Bit Rate |
28 Kbps - 6 Mbps (per stream) |
| Bit Rate Mode |
Constant, Variable |
| Signal to Noise Ratio |
More than 50 dB |
| Image Enhancement |
Backlight compensation; White balance: automatic, predefined and manual; Brightness; Automatic gain control; Auto exposure: automatic, predefined and manual; Flickerless |
| Privacy Masking |
4 configurable regions |
| Text Overlay |
User defined text on video |
| Image Orientation |
Image flip and mirror |
| Audio |
Compression
|
8kHz, Mono, PCM, 16 bit encoding |
Audio Input
|
Terminal block |
Audio Output
|
Terminal block |
| Network |
Protocol
|
TCP, UDP, HTTP, HTTPS, DHCP, PPPoE, RTP, RTSP, IPv6, DNS, DDNS, NTP, ICMP, ARP, IGMP, SMTP, FTP, UPnP, SNMP, Bonjour |
Ethernet Port
|
1, Ethernet (10/100 Base-T), RJ-45 connector |
Security
|
IP address filtering; HTTPS encryption; Password protected user levels |
| Alarm |
Alarm Triggers
|
Video motion detection (3 regions); External device through digital input |
Alarm Response
|
Notify control center; Change camera settings; Command other devices; E-mail notification with snapshots; Upload video, snapshot to FTP server; Activate external device through digital output |
| Interface |
Digital Input
|
1, TTL, terminal block |
Digital Output
|
1, TTL, terminal block |
Local Storage
|
MicroSD / MicroSDHC memory card slot (card not included) |
| General |
Power Source
|
PoE Class 3 (IEEE802.3af) / 11.52 W (heater and fan off)
PoE Class 3 (IEEE802.3af) / 12.96 W (fan on)
DC 12V / 8.76 W (heater and fan off)
DC 12V / 10.8 W (heater and fan on) |
Weight
|
3.13 lb (1420 g) |
Dimensions (Diam. x H)
|
5.98 x 5.18" (152.00 x 131.50 mm) |
Mount Type
|
Surface, Pendant, Wall, Corner, Pole, Flush |
Environmental Casing
|
Weatherproof (IP66 rated); Transparent vandal proof dome cover, up to 3844.16 lbF (1743.68 kgF) |
Operating Temperature
|
-22 ~ 122°F (-30 ~ 50°C) for DC 12V; 7 ~ 122°F (-5 ~ 50°C) for PoE |
Approvals
|
CE, FCC, IP66 |
| System Integration |
Unified Solution
|
Fully compatible with ACTi software |
ISV Integration
|
Software Development Kit (SDK) available |
Firmware Access Browser
|
Microsoft Internet Explorer 6.0 or newer |